ChromaMelt-2R/ChromaMelt-2RX Innovative Snow Sensor and Controller for 2 x 24A loads outputs

2022-05-11
■ Introduction
● The ChromaMelt-2R and the ChromaMelt-2RX are the ultimate "All in One" Snow Sensors & controllers for Light commercial and residential use. “Plug and Play” controllers for frost protection, ice and snow melting applications.
● When receiving a signal from the built-in snow sensor, they activate the contactors energizing the heating el-ements. Based on the configuration and settings, the two outputs to the two zones are activated together or in staggering mode.
● The outdoor temperature set-point as well as the ambient lower limit temperature can be easily set by the remote control.
● The Technician Settings mode allows installer or technician to adjust the parameters for customized installations using the remote control.
● The adjustable Hold-On timer, keeps the outputs to the zones active to ensure complete snow melting.
● The Hold-On (Time delay) is adjustable in the range of 0 up to 48 hours.
■ Features:
● Energy Efficient algorithm
● User friendly programming and setting adjustment using large LCD display remote control
● Up to 2 zones activation (24A each 110-240VAC)
● Sequencing between zones - Allowing larger snow melting area with less available power on site
● Optional indoor panel - CS-IR I.R. receiver
● Manual and Automatic modes. Selected by physical switch or using the remote control
● Technician testing / commissioning mode for easy and fast system test all year long (even during summer or at high temperatures)

Chromalox

ChromaMelt-2RChromaMelt-2RX

More

Part#

Innovative Snow SensorInnovative Snow Controller

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

December 2020

PK566

1.3 MB

- The full preview is over. If you want to read the whole 14 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: