FSV Series VALVES
● Remove ADV from packaging and inspect for transportation damage. Make sure the ADV specifications match your application
requirements.
● DO NOT install the ADV on equipment that is pressured. Depressurize the system or isolate the system before installing.
● A ball-valve and strainer should be installed on the system prior to the ADV. This will prevent:
■ clogging of the ADV
■ allowing isolation of the ADV for service work
● Install ADV with flow going in the direction of the flow arrow on the body of the valve. Teflon tape and or pipe dope may be used on the threads of the ADV, but great care should be taken. Teflon tape and pipe dope, if if enters the ADVs valve body, may damage normal function of the ADV.
● install ADV below device to be drained.
● Set valve on time and valve off time to desired settings.
● Supply the ADV with the proper electrical supply voltage. Please check the side of the coil for proper voltage.
● Pressurize the system and check for leaks.
● Observe all Federal. State and local laws and regulations when installing and operating the ADV.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2006/6/21 |
|
|
|
|
|
M4267-1205 |
|
|
305 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
