SSP-KONSTANTER 32 N Series SSP 120, SSP 240 and SSP 320 Programmable Power Supplies
■Features and Range of Applications
▲Depending upon where they are used and prevailing local conditions, electrical and electronic devices may be subject to significant supply power fluctuation in the absence of stabilizing and back-up systems.
▲Automotive electrical system voltage characteristics during starter motor operation offer a typical example.
▲R&D, production and test departments must be able to assure that electrical equipment is capable of executing all required functions under these types of conditions.
▲Type SSP 120, SSP 240 and SSP 320 KONSTANTER power supplies from Gossen Metrawatt GmbH support users in fulfilling this objective.
In particular in automated test systems for routine testing, SSP KONSTANTERs are capable of high throughput rates. Short response times assure accurate emulation of rapidly changing voltage and current characteristics.
▲Power consumer characteristics relative to dynamic supply powercan thus be tested and simulated very easily.
▲The integrated calibration procedure and the included calibration certificate are especially important for use in production and testing departments which are certified in accordance with ISO 9000.
▲SSP KONSTANTERs (single output system power supplies are programmable, voltage and current regulated DC power supplies with 120, 240 or 320 W of output power.
▲They are microprocessor controlled, and are furnished with an addressable RS 232C serial interface as standard equipment. Up to 30 KONSTANTERs can thus be controlled from a single PC port.
▲An IEEE 488 interface can be integrated as an option. Complete control of all device functions, as well as querying of measured values, setting parameters and device statuses is possible via both interfaces.
▲Manual adjustment of voltage and current is accomplished by means of two rotary pulse encoders with selectable adjusting sensitivity.
▲Two 4-place multifunction displays are used for precision read-out of measured values (V, A and W), as well as for menu-driven configuration of numerous additional functions such as limiting setting ranges, overvoltage protection, overcurrent shutdown delay and programmable, digital signal inputs and outputs.
▲Up to 243 settings can be saved to memory and recalled either individually or sequentially, for example in order to generate specific voltage or current characteristics. And innovative circuit technology allows for nearly load independent response times of less than 1 ms.
▲Output parameters can thus be superimposed with AC signal right up into the kHz range via the analog interface which is furnished as standard equipment.
▲The measuring function includes a Min-Max value memory, limit monitoring signals and a HOLD function.
|
SSP-KONSTANTER 32 N 、 SSP-KONSTANTER 32 N Series 、 SSP 120 、 SSP 240 、 SSP 320 、 SSP 120-20 、 SSP 120-40 、 SSP 120-80 、 K320A 、 K321A 、 K322A 、 SSP 240-20 、 SSP 240-40 、 SSP 240-80 、 SSP 320-32 、 K330A 、 K331A 、 K332A 、 K334A |
|
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
12/8.21 |
|
|
|
|
|
|
|
|
2.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
