LEDPRO Wi-Fi PIR Camera System
These instructions should be read carefully and retained for further reference and maintenance. Timeguard reserve the right to alter these instructions at any time. Up to date instructions will always be available for download at www.timeguard.com
●Safety
■ Before installation or maintenance, ensure the mains supply to this system is switched off and the circuit supply fuses are removed or the circuit breaker turned off.
■It is recommended that a qualified electrician is consulted or used for the installation of this luminaire and install in accordance with the current IEE wiring and Building Regulations.
■ Check that the total load on the circuit including when this system is fitted does not exceed the rating of the circuit cable, fuse or circuit breaker.
■ To clean use a clean dry cloth only. Do not use liquid cleaners.
●Technical Specifications
■Mains Suppply: 220-240V AC 50H
■Maximum Switchable Load: 200W LED
■Detection Range: Up to 10 metres
■Detection Angle: 270 ̊
■PIR Time Delay: 30sec, 2min, 8min, 15min
■PIR Sensitivity: Defined by Tuya Smart App
■Camera Resolution: 1080p
■Viewing Angle: 150 ̊
■Video Recording: (Event) 1080p @15fps (Continuous) VGA
■Video Format: MP4
■Audio: Two Way
■Siren Volume: 100dB
■Operating Temperature: 0º - 40º
■WLAN Standard: 802.11 b/g/n
■WLAN Standard: 2.4GHz
■Supports Micro SD Card: 128GB max. Class 10 (not supplied)
■Cloud Storage: Optional in App purchase (Tuya)
■Power Consumption: <6W (not including luminaire)
■Lux Level: Non-adjustable
■Weatherproof Rating: IP55
■CE Compliant
■Dimensions (H x W x D): 189mm x 80mm x 140mm
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
December 2021 |
|
Issue 3 |
|
|
|
8.7 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.