Series DTEF 1652 DN100 PN10 RETURN LINE FILTER,change over

2022-04-21
●Return-line filter series DTEF 1652 have a working pressure up to 10 bar.Pressure peaks will be absorbed by a sufficient margin of safety.
●The DTEF-filters are directly mounted to the reservoir and connected to the return-line.
●A rotary slide valve which is integrated in the middle of the housing makes it possible to switch from the dirty filter-side to the clean filter-side without interrupting operation.
●The filter element consists of a star-shaped, pleated filter material which is supported on the inside by a perforated core tube and is bonded to the end caps with a high-quality adhesive. The flow is from outside to inside.
●For cleaning the stainless steel mesh element (see special leaflets 21070-4 and 39448-4) or changing the filter element, remove the cover and take out the element. The mesh elements are not guaranteed to maintain 100% performance after cleaning.
●For filtration finer than 40 μm use the disposable elements made of paper or microglass. Filter elements as fine as 5 μm(c)are available; finer filter elements on request.
●Eaton filter elements are known as stable elements which have excellent filtration capabilities and a high dirt retaining capacity, therefore having a long service life.
●Eaton filter can be used for petroleum-based fluids, HW emulsions, water glycols, most synthetic fluids and lubrication fluids. Consult factory for specific fluid applications.
●When changing the filter element, a detachable connection between the filter head and the filter bowl prevents dirty oil from flowing into the tan

Eaton

DTEF 1652DTEF.1652.10VG.16.S.P.-.FS.B.-.E2.O.-.-01E.631.10VG.16.S.P.-Series DTEFDTEF

More

Part#

RETURN LINE FILTER

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2021/11/12

1038 G

1021 KB

  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: