FMX7100/ 8100 Series STATIC MIXERS A Technical Introduction

2022-04-19
●The FMX7100 and FMX8100 series mixing elements are injection molded in one operation to ensure low cost with excellent quality. The FMX7100 series are specifically designed for low viscosity applications. The FMX8100 plastic spiral elements were developed for adhesive and sealant and other high viscosity mixing applications. The leading and trailing edges of the FMX8000 mixers are "knife edged" so that the unit flushes clean with less solvent—no flat leading edges to accumulate material.
●Polyacetal is completely inert to most common solvents, such as MEK acetone, and methylene chloride for use in the Adhesive and Insulation industries. Its maximum service temperature is 250°F. Polyacetal is not recommended for service with bases or acids. Polypropylene has excellent chemical resistance and a maximum service temperature to 200°F. Metal or plastic tubing may be used to house the mixing sections. However, to achieve maximum performance, the sections must fit snugly inside the tube. Accepted tolerance is no more than 2% greater than the mixer diameter

Omega Engineering

FMX7100 SeriesFMX7100FMX8100FMX8100 SeriesFMX7109-ACFMX8125-PFMX7221-CPFMX9611FMX8263FMX7251FMX8481SFMX9603FMX7200 SeriesFMX7200FMX7103-ACFMX7106-PFMX7109-PFMX7120-ACFMX7120-PFMX8112-ACFMX8112-PFMX8118-ACFMX8118-PFMX8124-ACFMX8137-ACFMX8137-PFMX8149-ACFMX8150-PFMX7232FMX7222FMX7251-CPFMX8400 SeriesFMX8400FMX8442SFMX8451SFMX8452SFMX8462SFMX8482SFMX8412SFMX8413SFMX8414SFMX8415SFMX8421SFMX9600 SeriesFMX9600FMX9604FMX9605FMX9608FMX8200 SeriesFMX8200FMX8234FMX8213FMX8214FMX8223FMX8224FMX8233FMX8251FMX8253FMX8254FMX8262

More

Part#

STATIC MIXERSMIXING ELEMENTSALL-PLASTIC STATIC MIXER ASSEMBLIESALL STAINLESS STEEL STATIC MIXERSSTAINLESS TUBESPIRAL SANITARY MIXERSPOLYACETAL STATIC MIXER ASSEMBLIES

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2013/11/23

928 KB

  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: