SEARAY™ Right Angle Fixturing Recommendation For use with Samtec SEAM-RA/SEAF-RA Series - 8 and 10 Row Connectors

2022-04-18
●Samtec SEARAY™ Right Angle connectors (SEAM-RA/SEAF-RA Series) are processed like other high density, open pin field array devices. The basic steps are:
■Closely follow Samtec’s recommended footprint and stencil designs,
■Place the SEARAY™ connectors on the board,
■Use an optimized oven profile to ensure proper solder charge reflow and joint formation.
●Although not every application requires it, Samtec recommends the use of a Fixture Tool for the 8 and 10 row versions of the SEARAY™ connector to maintain co-planarity through the reflow process. Each SEARAY™ connector utilizes a specific Fixture Tool based on the connector’s gender, number of positions and number of rows. The Fixture Tools can be used with or without the connector’s optional Guide Posts. Refer to the chart below for valid SEARAY™ Fixture Tool Part Numbers.

TOBY-VALCON,TOBY

SEAM-RASEAM-RA SeriesSEAF-RA SeriesSEAF-RACAT-SEAF-20-01-RACAT-SEAF-30-01-RACAT-SEAF-40-01-RACAT-SEAF-50-01-RACAT-SEAM-20-08-RACAT-SEAM-30-08-RACAT-SEAM-40-08-RACAT-SEAM-50-08-RACAT-SEAM-20-10-RACAT-SEAM-30-10-RACAT-SEAM-40-10-RACAT-SEAM-50-10-RA

More

Part#

Right Angle connectors

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

May 25, 2011

Rev: A

454 KB

  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: