AN1128: Bluetooth® Coexistence with Wi-Fi®

2022-04-18
●This application note describes methods to improve coexistence of 2.4 GHz IEEE 802.11b/g/n Wi-Fi and Bluetooth® radios. These techniques are applicable to the EFR32MGx family and EFR32BGx family. This application note assumes you have a basic understanding of how Wi-Fi coexistence is implemented on EFR32 devices. For more information, see UG103.17: Wi-Fi® Coexistence Fundamentals.
●KEY POINTS
■Configure PTA support for Bluetooth
■Use application code existence extensions
■Order the Coexistence Backplane Evaluation Board
●Introduction
■This application note includes the following sections:
◆2 PTA 3-Wire BLE Functional Overview describes how to configure the Silicon Labs Packet Traffic Arbitration (PTA) for Bluetooth.
◆3 PTA Support Software Setup describes how to configure the Silicon Labs Packet Traffic Arbitration (PTA) for Bluetooth.
◆4 Application Code Coexistence Extensions describes how to use PRS for radio digital signal output.
◆5 Coexistence Backplane Evaluation Board (EVB) explains how to order the EVB for evaluating the Silicon Labs EFR32 software coexistence solution

Silicon Labs

EFR32MGxEFR32BGxEFR32

More

Part#

Bluetooth SDKBluetooth Mesh SDK

More

More

Application note & Design Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

February 2022

Rev. 1.8

AN1128

2.5 MB

- The full preview is over. If you want to read the whole 28 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: