PP20H-D1 IO-Link Operating Manual
■IO-Link is an input/output technology standardised worldwide according to IEC 61131-9. It permits manufacturer independent digital, bidirectional point-to-point communication. For this purpose, sensors are connected to the IO-Link master via standardised three-wire plug-in cables. IO-Link is available for various sensor technologies therefore use following link: Know-ledge page.
■With the IO-Link master, which bundles several sensors, the connection to the controller is made via the respective fieldbus system. In addition, an Ethernet-based connection from the master allows direct communication from the sensor to IT systems. IO-Link masters are avail-able as field devices for decentralized mounting or as versions for mounting in control cabinets. Many control suppliers also offer IO-Link input terminals and thus an IO-Link master implemented directly on the control. The maximum cable length between sensor and master is 20 m. However, significantly longer connections from the sensor to the controller can be realized by connecting a field master to a field bus system. This gives them maximum flexibility in the connection solution.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
26 September 2019 |
|
|
V2.1 |
|
|
|
|
|
820 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
