R 30 Fault location system
■DC Testing up to 400 kV
■VLF testing up to 70 kV
■ARM® up to 50 kV
■Surging for Pinpointing up to 100 kV
■PD and TD testing and diagnoses
■High discharge capability for long hv cable feeders
■Battery Power Supply 5 kVA
●DESCRIPTION
■The System R 30 is the largest most powerful test van system within the Megger product range. All functions and voltage ranges are full integrated and three phased. Single phase or two phase version are available on request. Recently extend-ed and improved, this already powerful System’s capabilities are increased.
■DC test voltage levels, including the well known Decay travelling wave prelocation method are available up to 110 kV or even 150 kV Option in the standard version (400 kV optional extension of the setup e.g assembled in a trailer), thus keeping and extending the world-wide standards set by System R 30.
■The widely approved and well-known Arc Reflection Method up to 50 kV gives this system the capacity to locate faults in cables above the 30 kV range. The standard high voltage supply provides DC test voltage levels up to 6 x U0. The combination with Meggers VLF tester series makes the System R 30 to a suitable solution for cable fault location and cable diagnoses for the cable networks up to 30 kV cable rating.
■A digital central control unit monitors the safety and all vital functions of the system. The integrated safety system concept and the separation transformer for defined potentials, guarantees the high Megger safety standards for men and equipment.
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2018/7/4 |
|
V03 |
|
R30_DS_EN_V03 |
|
245 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.