KONSTANTER SPL Series Programmable DC Electronic Load Operating Instructions

2022-04-13
●SPL Series programmable electronic load, a new product generation by GOSSEN METRAWATT, is designed for high performance. It provides you with powerful test functions and user-friendly HMI, RS232, USB, GPIB interfaces to support SCPI and Labview. Electronic loads of the SPL series are widely used in scientific research and production fields such as aerospace, shipbuilding, automotive electronics, solar cell, and fuel cell.
All “electronic load” and “load” which appear in this manual refer to SPL Series Electronic Load by GOSSEN METRAWATT if there is no special explanation.
●Function Features
■4 basic test functions: CC,CV, CR, and CP; 8 basic operating modes: CCL, CCH, CV, CRL, CRM, CRH, CPV, CPC;
■The 24 bits A/D and 17 bits D/A converters incorporated, provide this equipment with greatly enhanced setting and measurement resolution. 100kHz D/A conversion rate fully improves high-speed performance;
■Minimum operating voltage is less than 0.6 V (80 V-Loads) or 1,2 V (200 V-Loads) at the load’s full rated current.
■Perfect protection assures high reliability in the most complicated test environments;
■Innovative design of CPV and CPC modes effectively improves the practicability of CP mode;
■Circuit improvement greatly enhances the dynamic response of CR mode and widens the application scope of that mode;
■High-speed transient operation with separate setting options for high and low level, rise and fall time.
■Powerful sequential test function; with a minimum step time of 10 μs; and a maximum step time of 10000 s. Cyclic numbers can beadjusted freely and a sequence can be chained to another sequence to achieve even more complex test procedures;
■The input binding posts with their innovative design are especially suitable for large current testing;
■Provides short-circuit test, battery discharge test and other auxiliary functions;
■A high-efficiency, intelligent cooling system can effectively reduce system temperature and enhance power density
■Automatic ON/OFF function simplifies test operation;
■Knobs and digital keypad makes the operation more convenient;
■Save/recall function can save multiple groups of general settings;
■Supports SCPI (Standard Commands for Programmable Instrumentation) and Labview, and provides necessary PC software.

Gossen Metrawatt

SPL 250-30 SeriesSPL 400-40 SeriesSPL 250-30SPL 400-40SPL 200-20SPL 350-30SPL SeriesK852AK853AK854AK855A

More

Part#

Programmable DC Electronic Load

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

3/10.16

3-349-702-03

1.2 MB

- The full preview is over. If you want to read the whole 56 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: