LB363 Series LoopBack Relay With Built-in AC Bypass Capacitors
The internal in-line capacitors allow you to eliminate the footprints for external components, while performing AC bypass functions internal to the relay. The capacitors used feature excellent signal integrity as well as low loss high frequency performance.
A typical loop-back load board application uses the Device Under Test (DUT) to test itself. In this method, the transmitter from the DUT is connected through a loop back path to the receiver of the DUT. The double pole design of the LoopBack relay is perfectly suited for differential signaling, allowing the relay to provide transmit and receive signals and their inversions to the DUT or through the bypass path.
The internal structure of the LoopBack relay reduces the number of discontinuities and shortens the signal path during loop back testing, providing lower insertion loss and higher signal integrity performance than two RF/GRF303 Series relays. In the normally closed mode (de-energized) the LoopBack relay provides four normally closed contacts. When energized, the moving contacts are connected together across the loop back structure to provide two through paths. The normally closed contacts have similar performance to RF/GRF303 Series relays.
This LoopBack relay is available in a surface mount ground shield and stub pins/or J-lead configuration to provide improve high data rate and high requency performance, as well as improved repeatability.
The DC LoopBack configuration provides internally shorted paths to allow “auxiliary” full spectrum signal routing.
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
012016 |
|
|
|
|
|
984 KB |
- +1 Like
- Add to Favorites
Recommend
- Why Kinglight KS Series LEDs Provide 5 Years Warranty
- Littelfuse Announces eFuse Protection ICs Series,Designed for heavy-use consumer electronics, data communications, and industrial applications
- Littelfuse Expands eFuse Protection ICs Series to Address More Diverse Demanding Applications
- Safran Electronics & Defense Has Completed its Acquisition of Syrlinks
- Littelfuse Adds 3425L Series SMD Resettable PPTCs Series Created for High-Voltage Applications
- Smiths Interconnect HBB Circular Connector Series is Rising to the Challenge of High Power Defense applications
- TE Connectivity Launches New Linx CW-RCS Series Wi-Fi 6/6E/7 Right-angle Whip Antennas with A Length of Only 54mm
- TT Electronics Adds Extra-High-Power Chip Resistors to Its WHPC Series Lineup, Enabling Improved Power Density Designs
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.