PLUG-CR95HF-B Daughter board for the CR95HF 13.56 MHz transceiver IC
●Description
■The PLUG-CR95HF-B includes a CR95HF contactless transceiver, a 47 x 34 mm 13.56 MHz inductive etched antenna and its associated tuning components.
■The user must connect a host to the board through the UART or the SPI connector. It allows to control the 13.56 MHz CR95HF multi-protocol transceiver IC from the host.
■The CR95HF acts as a slave. The host can configure the transceiver and send SPI or UART commands.
■The PLUG-CR95HF-B board is powered through the VPS pin.
●Features
■Ready-to-use printed circuit board including
▲CR95HF multi-protocol transceiver IC
▲47 x 34 mm 13.56 MHz inductive etched antenna and tuning components
▲SPI or UART connector for communication with the host
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
15-Mar-2012 |
|
|
Rev 2 |
|
|
022387 |
|
|
292 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
