1769-IF4, -IF8, -OF2, -OF8C, and -OF8V Compact I/O Analog Modules User Manual
■The 1769-IF4 and -IF8 analog input modules convert and digitally store analog data for retrieval by controllers, such as the CompactLogix™ or MicroLogix™ 1500. The module supports connections from any combination of up to four voltage or current analog sensors for the 1769-IF4 and up to eight for the 1769-IF8. The high-impedance input channels can be wired as either single-ended or differential inputs.
■The 1769-OF2 output module provides two single-ended analog output channels, each individually configurable for voltage or current. The 1769-OF8C and -OF8V output modules each provide eight single-ended analog output channels.
■The data can be configured on board each module as:
▲Engineering Units
▲Scaled-for-PID
▲Percent
▲Raw/Proportional Data
●Hardware Features
■The modules contain removable terminal blocks. The 1769-IF4 and -IF8 channels can be wired as either single-ended or differential inputs. The 1769-OF2, -OF8C, and -OF8V channels are single-ended only. Module configuration is normally done via the controller’s programming software. In addition, some controllers support configuration via the user program. In either case, the module configuration is stored in the memory of the controller. Refer to your controller’s user manual for more information.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
July 2005 |
|
|
|
1769-UM002B-EN-P |
|
3.6 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.