D1000 and D2000 OMEGABUS® Digital Transmitters
2022-03-31
The D1000 and D2000 Series digital transmitters are a complete family of easy to use interface modules for personal computers and other processor based equipment with standard serial I/O ports. The modules convert analog input signals to engineering units and transmit, in ASCII format, to any host computer with a standard RS-232C or RS-485 port. This modular design enables anyone familiar with a personal computer to construct a flexible and cost effective data acquisition system.These modules can measure temperature, pressure, flow, voltages,currents and various types of digital signals. The D1000 series provide direct interface to a wide variety of sensors and perform all signal conditioning, scaling, linearization and conversion to engineering units.Each module also provides digital I/O lines for controlling devices through solid state relays or TTL signals. These digital I/O lines along with integral limit setting capability provide alarm and control outputs. With the exception of the D1400 RTD and D1500 bridge modules, every D1000 module contains an on-board event counter.The event counter will count up to ten million transitions on the digital input line. All user selectable options(address, baud rate, alarms, etc.) are done through the communications port and stored in nonvolatile memory thereby eliminating switches or external adjustments of any kind.
The flexibility of this system allows users to mix and match the modules to fit their exact requirements. As many as 124 modules can be connected on one 4 wire cable.They can be placed remote from the host computer and from each other.
The D2000 series of user-programmable data acquisition and control modules allow direct interface of non-linear analog sensors to computers with serial I/O ports.
●Complete Sensor To RS-232C or RS-485 Interface
●Input Modules for Thermocouples, RTDs,Voltages, Currents, Pulse and Frequency, and Bridge Inputs
●Isolated Inputs
●RS-485 Format Permits Remote Communications Up to Four Thousand Feet
●D2000 Series Provide Linearization of Non-Standard Sensors
●Connect Up To 32 Modules On One Cable,Up to 124 Using a Repeater
●Alarm Outputs Standard
●Continuous Self Calibration, No Adjustment Requirements
The flexibility of this system allows users to mix and match the modules to fit their exact requirements. As many as 124 modules can be connected on one 4 wire cable.They can be placed remote from the host computer and from each other.
The D2000 series of user-programmable data acquisition and control modules allow direct interface of non-linear analog sensors to computers with serial I/O ports.
●Complete Sensor To RS-232C or RS-485 Interface
●Input Modules for Thermocouples, RTDs,Voltages, Currents, Pulse and Frequency, and Bridge Inputs
●Isolated Inputs
●RS-485 Format Permits Remote Communications Up to Four Thousand Feet
●D2000 Series Provide Linearization of Non-Standard Sensors
●Connect Up To 32 Modules On One Cable,Up to 124 Using a Repeater
●Alarm Outputs Standard
●Continuous Self Calibration, No Adjustment Requirements
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
