Precision Instrumentation Amplifier

2022-09-02

●The AD524 is a precision monolithic instrumentation amplifier designed for data acquisition applications requiring high accuracy under worst-case operating conditions. An outstanding combination of high linearity, high common-mode rejection, low offset voltage drift, and low noise makes the AD524 suitable for use in many data acquisition systems.
The AD524 has an output offset voltage drift of less than 25 μV/°C, input offset voltage drift of less than 0.5 μV/°C, CMR above 90 dB at unity gain (120 dB at G = 1000), and maximum nonlinearity of 0.003% at G = 1. In addition to the outstanding dc specifications, the AD524 also has a 25 kHz bandwidth (G = 1000). To make it suitable for high speed data acquisition systems, the AD524 has an output slew rate of 5 V/μs and settles in 15 μs to 0.01% for gains of 1 to 100.
As a complete amplifier, the AD524 does not require any external components for fixed gains of 1, 10, 100 and 1000. For other gain settings between 1 and 1000, only a single resistor is required.
The AD524 input is fully protected for both power-on and power-off fault conditions.
The AD524 IC instrumentation amplifier is available in four different versions of accuracy and operating temperature range.
The economical A grade, the low drift B grade, and lower drift, higher linearity C grade are specified from −25°C to +85°C.
The S grade guarantees performance to specification over the extended temperature range −55°C to +125°C. The AD524 is available in a 16-lead ceramic DIP, 16-lead SBDIP, 16-lead SOIC wide packages, and 20-terminal leadless chip carrier.
●FEATURES
■Low noise: 0.3 μV p-p at 0.1 Hz to 10 Hz
■Low nonlinearity: 0.003% (G = 1)
■High CMRR: 120 dB (G = 1000)
■Low offset voltage: 50 μV
■Low offset voltage drift: 0.5 μV/°C
■Gain bandwidth product: 25 MHz
■Pin programmable gains of 1, 10, 100, 1000
■Input protection, power-on/power-off
■No external components required
■Internally compensated
■MIL-STD-883B and chips available
■16-lead ceramic DIP and SOIC packages and 20-terminal leadless chip carrier available
■Available in tape and reel in accordance with EIA-481A standard
■Standard military drawing also available

ADI

AD524ADAD524ADZAD524AEAD524AR-16AD524AR-16-REELAD524AR-16-REEL7AD524ARZ-16AD524ARZ-16-REEL7AD524BDAD524BDZAD524BEAD524CDAD524CDZAD524SDAD524SD/883B5962-8853901EAAD524SE/883BAD524SCHIPS

More

Part#

Precision Instrumentation Amplifierprecision monolithic instrumentation amplifier

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2017/12/19

Rev. F

D00500-0-11/07(F)

908 KB

- The full preview is over. If you want to read the whole 30 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: