IMX12-DI01-2S-2T-0/ 24VDC Isolating switching amplifier 2-channel
●The devices feature DIP switches on the front. This allows to select between the output mode, the input circuit monitoring, as well as toggle between signal duplication and 1-channel operation. When using mechanical contacts, either line monitoring must be switched off or the contact must be wired with resistors (see wiring diagram).
●The green LED indicates operational readiness. An error in the input circuit causes the red LED to flash according to NE44. Then, the transistor of the corresponding output circuit locks.
●The device can be used in safety circuits up to SIL2 (high and low demand according to IEC 61508).
●The device is equipped with removable screw terminals.
■2 transistor outputs (ð 10kHz)
■Switchable: 2-channel or signal doubling
■Output mode adjustable (NO/NC mode)
■Input circuits monitored for wire-break/ short-circuit (ON/OFF switchable)
■Complete galvanic isolation
■Input reverse-polarity protected
■Removable screw terminals
■ATEX, IECEx, NEPSI, cUL, cFM, INMETRO, Kosha, TIIS, TR CU EAC, DNV, GL
■Installation in zone 2
■SIL 2
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020-01-18 |
|
|
Edition • 2020-01-18 |
|
|
|
|
|
245 KB |
- +1 Like
- Add to Favorites
Recommend
- ZETTLER Introduces HPI10 Series of Plug ＆ Play 10W Power Modules Supporting Input from 90-528VAC
- Aipulnion Looks Forward to Meeting Youin The Electronica India 2021
- Overcoming Challenges in Battery Storage Systems with P-DUKE‘s High-Isolation DC/DC Converters
- Selection Guide for Automotive Relays
- MEISHUO High Power Electromagnetic Relay MLQ-100-209-B-L1 with a Max. Switching Voltage of 250VAC
- Fujitsu Releases High-capacity Power Relay with Long Contact Life and Enables a Range of Safe, Compact Applications
- Solid State Relays That Are Suitable for Medical Equipment Applications | i-Autoc
- i-Autoc Solid-state Relay: An Ideal Choice for Textile Machinery Application
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
