Configuring the BeagleBone Black’s Ethernet Port for SSH Access
■While the BeagleBone Black comes with a serial access port via USB, it may be more convenient to use the Ethernet port for development. This enables more familiar access for developers who are used to using SSH, as well as enables the tools associated with an SSH connection to be used.
■This guide will set up the BeagleBone Black’s Ethernet port with a static IP address, which will allow the user to access the BeagleBone Black via SSH. This guide also provides a working example of setting up a PPP connection using a Skywire® LE910.
■This document assumes you want to connect your workstation directly to the BeagleBone Black with an Ethernet cable.
■NOTE: This procedure works only if you have your BeagleBone Black connected to your workstation when the BeagleBone Black boots. This procedure does not work if you unplug the ethernet from your BeagleBone Black after boot, or plug in the ethernet after boot. You will need to power cycle your BeagleBone Black with the Ethernet connection connected.
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
April 2016 |
|
rev 1 |
|
30112 |
|
393 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.