SINEAX A20 Panel Mounting Indicator with OLED data Display
■The A20 module is a panel mounting indicatorwith OL .ED datadisplay.
■The module has two RS485 serial ports, both supporting MODBUS-RTU protocol:
▲Master MODBUS-RTU Port: through it the data exchange with the connected slave I/O modules is performed.
▲Slave MODBUS-RTU Port: through it the data acquired from the slave 1/0 modules and their elaborations are exchanged with a master device. Through this port it is besides possible the indicator software configuration.
▲New Possibility by a self-reading to visualize and read the data written from an modbus-rtu master module connected to the Modbus-rtu slave port(when A20 is in modbus-rtu MASTER modality)
▲Besides the module has the following features:
◆Complete parameters
◆configurability both by the programming Menu and via software through the Slave RS485.
◆Easy navigation on the programming Menu by three buttons on the frontal panel.
◆Possibility to read and at choice to display upto 20 quantities.
◆New Autoscroll for visualized values
▲Possbility to define and display up to 10 elaborated quantities, obtained by the application of mathematical orlogical functions on the acquired/elaborated quantties.
▲Optional calculation ofthe moving average for the acquired analog quantities.
▲Optional scaling of the acquired/elaborated analog quantties.
▲Possibility to force the continuous or trigger writing of 10 quantities relative to the connected slave modules.
▲Possbility to define, for each elaborated quantity, an alam with two individually activable thresholds.
▲Alarm signalling bywarning message or by triggerwriting.
▲The quantities acquired through the Master MODBUS-RTU port and theirelaborations are made available to a master device through the Slave MODBUS RTU port.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2014/5/14 |
|
|
|
|
|
5.4 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.