ML2530A Calibration Receiver Application Note
■The ML2530A Calibration Receiver is used to measure the absolute and relative levels of RF instruments.
■Absolute level measurement is for the output level of signal generators. Relative level measurement is for the attenuation of attenuators.
■The frequency range covers the mobile band from 100 kHz to 3 GHz.
■The level has a wide dynamic range from –140 to +20 dBm.
◆Features
■The wide frequency range (100 kHz to 3 GHz) supports the mobile band.
■The wide level range (–140 to +20 dBm) supports many measuring instruments.
■The in-range linearity is good and accurate.
●Bandwidth: 100 Hz
▲range (+20 to -30 dBm) ±0.030 dB
▲range (–30 to –75 dBm) ±0.044 dB
▲range (–75 to –110 dBm) ±0.073 dB
●Bandwidth: 1 Hz
▲range (–110 to –140 dBm) ±0.040 dB
■The frequency bandwidth is 1 Hz to 100 kHz.
■The ML2530A has two modes; the Manual tuning mode, and the Monitor mode. The Manual tuning mode measures at high speed by displaying only frequency and level. The Monitor mode measures while observing the waveform spectrum.
|
|
|
|
Application note & Design Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2006-04 |
|
|
|
|
|
ML2530A-E-F-1 |
|
|
1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
