R&S®SZV100A Q/V BAND RF UPCONVERTER: Vector signal generation for component and satellite payload testing
■The R&S®SMW200A vector signal generator and R&S®SZV100A Q/V band RF upconverter work together to provide continuous coverage of all satellite bands from VHF to V as well as the frequencies used in mobile communications.
■The Q/V band upconverter setup consists of the R&S®SMW200A vector signal generator, R&S®SMA100B RF and microwave signal generator and R&S®SZV100A Q/V band RF upconverter. With its outstanding RF per-formance, the R&S®SMW200A provides the modulated, broadband wanted signal with bandwidths of up to 2 GHz. The R&S®SMA100B is responsible for the setup's highly precise, pure LO frequency.
■The upconverter setup is controlled using PC control soft-ware via IP protocol in the LAN. This makes it easy to con-figure all devices.
The R&S®SZV100A can be reliably remotely operated at distances up to 10 m thanks to the PC control software and feeding of the LO and wanted signals.
■The R&S®SZV100A’s compact housing design, low weight and mounting points allow it to be mounted as close as possible to the DUT, for instance on the outside of the TVAC or on the DUT itself. This makes it possible to optimally supply the DUT with the high output power of +16 dBm.
[ satellite ][ mobile industry applications ][ IMT/5G NR applications ] |
|
Supplier and Product Introduction |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
August 2020 |
|
Version 01.01 |
|
|
|
1.5 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.