Headend Optics Platform (CH3000) PS3005 250 Watt AC Power Supply
●The PS3005 is a high performance, hot‐swappable, 250 watt power supply and controller designed for the CH3000 chassis. The PS3005 accepts an AC input voltage in the continuous range from 100 to 240 volts at 50 to 60 Hz and provides 12 volts DC to the mid‐plane bus of the CH3000 for distribution to chassis modules. The PS3005 manages the RS285 communication on the mid‐plane bus, providing user access to the alarm, control and monitoring features of the active modules in the chassis. For easy set‐up of the CH3000, the PS3005 continuously polls and performs auto‐discovery of all active modules in the chassis.
●The PS3005 features power factor correction (PFC) for reduced energy costs, a minimum holdup time of 25 ms for glitch‐less switch‐over to stand‐by power and a front panel RS232 craft port. Additional features include over‐voltage, short‐circuit and over temperature protection.
●The PS3005 requires two full‐depth slots in the CH3000 chassis and mates with the BP‐P1 dynamic back plate provided with the unit. An optional 6 foot 3‐wire line cord is available.
●The PS3005 is available in two configurations, the PS3005D with front panel fluorescent display and joystick and the PS3005N with front panel status LEDs only. The PS3005D with its display and joy stick features allows the user direct access to the alarm, control and monitoring features of the active modules in the chassis without additional equipment. These may also be accessed via the RS232 craft port using ARRIS’s CMS software. The PS3005N provides the user with alarm status of the chassis only via the status LEDs. Alarm detail to the module level as well as control and monitoring features are accessed via the RS232 craft port using ARRIS’s CMS software.
AC Power Supply 、 hot‐swappable power supply 、 high performance power supply |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
03/2016 |
|
RevE |
|
|
|
515 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.