INSTALLATION OF LVC512 STANDARD RELAY ELECTRONICS
■SPECIFICATIONS
▲CONTROL DESIGN: Solid state components enclosed in a clear Lexan plug-in style housing. Housing carries no NEMA rating.
▲CONTACT DESIGN:S PDT (1 form C):one normally open (N0) and one normally closed (N.C), non-powered contacts.
▲CONTACT RATINGS: 10A @120, 240 VAC resistive 1/3HP @ 120,240 VAC.
▲CONTACT LIFE: Mechanical-5 million operations. Electrical-100000 operations minimum at rated load.
▲SUPPLY VOLTAGE: Standard 120 VAC, optional 24, 240 VAC models, plus 10%, minus 15%, 50/60Hz.
▲SUPPLY CURRENT: 120, 240, 24 VAC, Relay energized 4.4 VA.
▲SECONDARY CIRCUIT: 12 VAC RMS voltage on probes, 1.5 milliamp current.
▲SENSITIVITY: Models operate from 0-1, 000000 OHM maximum specific resistance. Field Adjustable.
▲TEMPERATURE: -40to 150 degrees F. ambient.
▲TERMINALS: All connections #6-32 screw type terminals with pressure clamps.
▲TIME DELAYS: Standard,.5 seconds on rising level.
▲LISTING: U.L. listed, Industrial Motor Control (508).
■INSTALLATION
▲Install octal socket in appropriate enclosure using two (2) #6 or #8 metal screws. 1A) Install rail mount socket on appropriate rai (DIN mount)in appropriate enclosure.
▲Wire control per wiring diagram, following N. E.C. and local codes.
▲Install control module in socket.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2005/3/11 |
|
|
|
M1220/1290 |
|
114 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.