Murata uSD-M.2 Adapter Datasheet
●Murata has partnered closely with Embedded Artists AB to provide a flexible Wi-Fi & Bluetooth solution for NXP Semiconductors' i.MX RT/6/7/8 Evaluation Kits. Murata;s uSD-M.2 Adapter Kit with Embedded Artists' Wi-Fi/BT M.2 Modules enable users with a simple plug-in solution. The Embedded Artists5 Wi-Fi/BT M.2 Modules are based on Murata modules using Cypress Semiconductors and NXP Semiconductors' Wi-Fi/BT chipsets. Current Wi-Fi/BT M.2 EVB support includes Murata Type 1DX (CYW4343W), Type 1MW (CYW43455), Type 1LV (CYW43012), Type 1ZM (NXP 88W8987), and Type 1YM1 (NXP 88W8997 - WLAN-SDIO strapping configuration). Note that all these M.2 EVB’s use the WLAN-SDIO interface; this adapter does not support interfacing WLAN-PCIe configured modules such as Embedded Artists* Type 1CX (CYW4356), Type 1XA (CYW54591) and Type 1YM (NXP 88W8997 - WLAN-PCIe strapping configuration). The uSD-M.2 Adapter provides the following interfaces to host MCU/MPU:
■microSD (uSD) interface for WLAN-SDIO (SD is an option with microSD-SD Adapter).
■Arduino Headers (i.MX RT/8) or Flat/Rex Connector ii.MX 6/7) for Bluetooth UART, Bluetooth PCM and WLAN/Bluetooth control signals.
■Optional power, debug, and clocking signals connect through Arduino Header or Micro-AB USB Connector.
i.MX RT/6/7/8 、 i.MX 6 、 i.MX 7 、 i.MX 8 、 i.MX RT 、 CYW4343W 、 CYW43012 、 CYW43455 、 88W8997 、 CYW4356 、 CYW54591 、 88W8987 |
|
uSD-M.2 Adapter 、 Evaluation Kits 、 Modules 、 Connector 、 Adapter |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
1/26/2020 |
|
V 2.1 |
|
E2B-93-1094 |
|
5.2 MB |
- +1 Like
- Add to Favorites
Recommend
- SiC SBDs SCS308AH from ROHM Chosen by Murata Power Solutions for Data Center PSUs
- Unleashing the Potential of i.MX 8M Mini in Industrial and Medical Applications
- Kyocera Consolidates Manufacturing Operation for Optical Components into Tokyo Hamura Facility
- Ultra-Low IQ PMIC from ROHM Selected to Power NXP iMX8M Nano for High Performance Embedded Artists Industrial Control Board
- FIRSTOHM is Providing the Best Solution for Passing the Pulse 5a Test: Automotive Load Dump Resistor
- Coherent Introduces 150W Monaco Laser Delivering Energy Pulses of 150µJ at a Rate of 1MHz for Large OLED Display Glass Cutting
- Lidar Demonstration Board Drives Lasers with Currents up to 220A with Under 3-ns Pulses Using eGaN FETs
- Circuit Design Guidelines of Driving High Power Pulsed VCSEL Sensor
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.