PCA9559 5-bit multiplexed/1-bit latched 6-bit I2C-bus EEPROM DIP switch

2022-02-28
●PCA9559 is a 20-pin CMOS device consisting of one 6-bit non-volatile EEPROM registers, 5 hardware pin inputs and a 5-bit multiplexed output with one latched EEPROM bit. It is used for DIP switch-free or jumper-less system configuration and supports Mobile and Desktop VID Configuration, where 2 preset values (1 sets of internal non-volatile registers and 1 set of external hardware pins) set processor voltage for operation in either performance or deep sleep modes. The PCA9559 is also useful in server and telecom/networking applications when used to replace DIP switches or jumpers, since the settings can be easily changed via I2C/SM Bus without having to power down the equipment to open the cabinet. The non-volatile memory retains the most current setting selected before the power is turned off.
The PCA9559 typically resides between the CPU and Voltage Regulator Module (VRM)when used for CPU VID (Voltage IDentification code) configuration. It is used to bypassthe CPU-defined VID values and provide a different set of VID values to the VRM, if anincrease in the CPU voltage is desired. An increase in CPU voltage combined with anincrease in CPU frequency leads to a performance boost of up to 7.5%. Lower CPUvoltage reduces power consumption.
The PCA9559 has 2 address pins allowing up to 4 devices to be placed on the same I2C-bus or SMBus.

NXP

PCA9559PCA9559PW

More

Part#

DIP switch

More

More

Datasheet

More

More

Please see the document for details

More

More

TSSOP20

English Chinese Chinese and English Japanese

25 October 2021

Rev. 5.0

291 KB

- The full preview is over. If you want to read the whole 20 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: