GEOHM PRO and XTRA Earth Tester (without/with GPS)
■GEOHM PRO and XTRA measuring instruments are used to conduct measurements whose results indicate the safety status of the tested system. Within this context, the following recommendations must be adhered to in order to ensure correct operation and the correctness of the obtained results:
▲Before using the instrument, the operator must fully familiarize him or herself with the instructions and observe applicable safety regulations, as well as the manufacturers recommendations.
▲GEOHM PRO and XTRA measuring instruments are intended for measuring earth resistance, protective and equipotential bonding conductor connections and earth resistance in the ground, and for current measurement with clamp meter Use of the instrument for any purpose other than those specified in these instructions may result in damage and represents a serious source of danger for the user
▲The instrument may only be operated by appropriately qualified persons who are also authorized to perform measurements in electrical systems Handling of the instrument by unauthorized persons may result in damage to the device and represents a serious source of danger for the user
▲Use of these instructions does not eliminate the need to comply with work safety and fire prevention regulations which are applicable to the execution of this type of work. The responsible occupational safety officer must be consulted before beginning work with the instrument under special conditions, for example in an environment where the risk of explosion or fire prevails.
▲The following are impermissible:
◆Use of an instrument which is damaged or whose function is fully or partially impaired
◆Use of an instrument with a cable whose insulation is damaged
◆Use of an instrument which has been stored for an excessively long period of time under
◆unfavorable conditions (e g high humidity) After moving the test instrument from a cold to a warm environment with high humidity, no measurements may be conducted until the instrument has warmed up to ambient temperature (approx. 30 minutes).
▲Before measurement, it must be assured that the cables are connected to the appropriate measurement sockets.
▲It's impermissible to charge the integrated rechargeable batteries with any charger other than the one specified in the scope of delivery.
▲The inputs of the measuring instrument are equipped with electronic overload protection, for example in case they're inadvertently connected to mains power:
-For all input combinations -Up to 276 V for a period of 30 seconds
▲Repairs may only be carried out by our service department (see address in section 13).
▲This instrument fulfills all requirements specified in EN 61010-1 and EN 61557-1 4 and 5.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2017/4/2 |
|
|
|
|
|
3-349-915-03 |
|
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
- Effortless Precision and Unmatched Power: Mars Pro GNSS Receiver from ComNav
- Shenzhen Dianyang Technology Co.,Ltd engaged in ELEXCON Tradeshow, Showing CA Pro Series Thermal Camera
- Highly Compact Mini Analog Pro Ex i signal conditioners with SIL 3 win the Gold German Innovation Award 2023
- Now Available: Silicon Labs‘ Pro Kit for Amazon Sidewalk Development
- Tattu Pro High-capacity Drone Smart Battery ——The Newest Advance in UAV Power
- The METZ CONNECT Field Assembled Rj45 Field Plug Pro Suitable For Structured Cabling With Industry Or Data Centers, Data Transmission Rates Up To 40 GBit/s
- The Chinese Silicon Carbide Epitaxial Wafers Market Is Both Pro
- Experience the Sierra Wireless Refreshed AirLink® Router Portfolio of Mission-Critical Cellular Networking Solutions
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
