METRISO PRIME 10 Insulation Resistance Tester
■The METRISO PRIME 10 insulation tester has been developed for the detection of insulation damage and for protection against electric shock in electrical power supply networks. The measurement result are used to evaluate the safety of electrical installations. And thus the following points must be observed in order to assure flawless functioning and the accuracy of the results obtained:
▲Before beginning work with the test instrument, familiarize yourself thoroughly with these operating instructions. Observe all of the manufacturer's safety requirements and technical data as well.
▲Any use for other than the intended purpose in accordance with the technical specifications included in the operating instructions may result in damage to the instrument and represents a hazard for the user.
▲The METRISO PRIME 10 may only be used by suitable, qualified personnel for conducting work on electrical installations. Use of the instrument by unauthorized personnel may result in damage to the instalment and represents a hazard for the user.
▲During insulation resistance measurement, dangerous voltage of up to 10 kV (METRISO PRIME 10) is applied to the ends of the test leads which are connected to the test instrument.
▲The device under test must be disconnected from mains power before conducting the insulation resistance measurement.
▲During insulation resistance measurement, the measurement cables must not be disconnected from the device under test until measurement has been completed (see section 3.0) The device under test is not capacitively discharged beforehand which may result in electric shock
▲Use of these operating instructions does not eliminate the need comply wrth work safety, health protection and other safety regulations or fire prevention measures during testing Before beginning work in special environments such as voltage-free systems or potentially explosive atmospheres, consult with the responsible contact persons for safety and health.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2019/1/3 |
|
|
|
|
|
3-349-924-03 |
|
|
3 MB |
- +1 Like
- Add to Favorites
Recommend
- Remesas CPX3 – The First Powerline Solution with A PRIME 1.4 Certification Supporting Security Profiles and Backward Compatibility
- Metrodyne’s MIS-3500 Series Integrated Pressure Sensor Provides 3V or 5V Rail-to-Rail Ratiometric Analog Output
- ITT DPGM, DPJM, and DPJMB Connectors，Which Designed for Space and Weight are Prime Considerations Applications
- Calorimetric Flow Sensing Technology Makes High Dynamic Range Sensors Possible
- Keysight’s New Parallel Parametric Test System Delivers High Throughput and Cost-Effective Wafer Test
- ROHM‘s New IPX8 Rated Barometric Pressure Sensor IC: Compact and High Accuracy
- TDK’s ICP-20100 is the Lowest Power Barometric Pressure Sensor to Achieve NextNav Certification
- Dual Symmetric Boosters for 1500 V Solar inverters
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
