无线电池供电型占空传感器安装说明(Wireless Battery-Powered Occupancy SensorInstallation Instructions)

2022-02-22
●产品说明:
Lutron 天花板安装占用传感器是一种无线、电池供电、被动式红外 (PIR) 设备,通过与调光或开关装置之间的射频通信自动控制灯光。
●重要注释:
1.本传感器属于系统的一部分,如果没有兼容的调光或开关装置,则无法用其控制负载。有关安装信息,请参阅接收装置的说明书。
2.仅限使用柔软湿布清洗传感器。请勿使用任何化学清洁剂。
3.本传感器仅限在室内使用。工作温度介于0 °C至40 °C(32 °F至104 °F)之间。
4.请勿粉刷传感器。
5.只能使用优质锂电池,其规格为CR123,电压 3 V 电池- (ANSI-5018LC, IEC-CR17345)。请勿使用充电电池。使用不当的额定电池会损坏传感器。
6.射频系统的范围和工作性能取决于一系列复杂的因素,如:
■系统组件之间的距离
■建筑物的几何结构
■分隔系统组件的墙体结构
■临近系统组件的电气设备
●Product Description:
Lutron ceiling-mounted occupancy sensors are wireless, battery-powered, passive infrared (PIR) devices that automatically control lights via RF communication with a dimming or switching device.
●Important Notes:
1.This sensor is part of a system and cannot be used to control a load without a compatible dimming or switching device. Refer to the instruction sheets of the receiving device(s) for installation information.
2.Clean sensor with a soft damp cloth only. DO NOT use any chemical cleaners.
3.The sensor is intended for indoor use only. Operate between 32 °F and 104 °F (0 °C and 40 °C).
4.DO NOT paint the sensor.
5.Use only high-quality lithium batteries, size CR123, 3 V- (ANSI-5018LC, IEC-CR17345). DO NOT use rechargeable batteries. Using improperly-rated batteries could damage the sensor.
6.The range and performance of the RF system is highly dependent on a variety of complex factors such as:
■Distance between system components
■Geometry of the building structure
■Construction of walls separating system components
■Electrical equipment located near system components

Lutron

LRF3-OCR2B-PLRF4-OCR2B-PLRF5-OCR2B-PLRF7-OCR2B-P

More

Part#

Wireless Battery-Powered Occupancy Sensor无线电池供电型占空传感器

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

05/2020

Rev. A

041755

4.5 MB

- The full preview is over. If you want to read the whole 6 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: