OPL1600 ULTRA-LOW POWER 2.4GHZ WI-FI +BLUETOOTH SMART SOC
●The OPL1600 SoC features a fully integrated 2.4GHz radio transceiver and baseband processor for Wi-Fi 802.11b and Bluetooth® Smart applications. The SoC can be used as a standalone application-specific communication processor or as a wireless data link in hosted MCU systems where ultra-low power is critical. The OPL1600 supports flexible memory architecture for storing profiles, stacks and custom application codes, and can be updated using Over-The-Air (OTA) technology. Qualified Bluetooth Smart protocol stack and Wi-Fi TCP/IP stack are stored in a dedicated ROM. The main feature of OPL1600 is the addition of 8Mbit embedded Flash as the system primary Flash. The 8Mbit embedded Flash is used to store user application and system patch. The OPL1600 is equipped with dual processors, ARM® Cortex®-M0 and M3, for handling different processes. All software runs on the ARM®Cortex®-M0 processor while more intensive application-specific activities run on the ARM® Cortex®-M3 processor. The OPL1600 can be connected to any external MCU through SPI, I2C or UART interfaces and sensors or other devices through GPIOs. The transceiver interfaces directly to the antenna and is fully compliant with the Wi-Fi 802.11b and Bluetooth 5.0 BLE standards. With integrated antenna switch, RF balun, power amplifier (PA) and low noise amplifier (LNA), the OPL1600 allows both Wi-Fi and Bluetooth Smart to minimize PCB design area and external component requirement.
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
QFN;QFN48 |
|
English Chinese Chinese and English Japanese |
|
2021/06/18 |
|
Version 1.1 |
|
|
|
1.9 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.