CST92F25 Datasheet

2022-02-15
●Product Overview
■Introduction
▲The CST92F25 is a highly integrated Bluetooth 5.0 low energy SOC device. It has 32-bit ARM® Cortex™-M0 CPU with 512KB Flash, 64KB SRAM and an ultra-low power, highperformance, multi-mode radio. It intergrates rich feature peripheral units, programmable protocol and profile to support BLE application, makes customers’product to be built with minimum bill-of-material (BOM) cost.
■Features
▲CPU
◆32-bit ARM® Cortex™-M0 CPU
◆Up to 64MHz clock
▲Memories
◆512KB Flash
◆64KB Data SRAM
◆8KB Code Cache
▲2.4GHz Transceiver
◆Compliant to Bluetooth 5.0
◆Single-pin antenna: no RF matching or RX/TX switching required
◆Support two data rates
◆— 2Mbps
◆— 1Mbps
◆TX Power -20 to +5dBm in 3dB steps
▲Low power consumption
◆Transmitter: 5.5mA@0dBm Tx power, with DC-DC
◆Receiver: 5mA @with DC-DC
◆Sleep Mode 6μA@with 32KHz RTC and all SRAM retention
◆0.7μA @ OFF Mode(IO wake up only)
▲Oscillator
◆Support 16M XTAL
◆Embedded 32M RC oscillator and 32K RC oscillator
▲PeriPheral
◆20/11 general purpose I/O pins
◆— All pins can be configured as digital interface by programmable IO MUX function mapping(except P01)
◆— All pins can be configured for wake-up and external interrupt
◆— All pins output state can be retained in sleep mode
◆2x UART
◆6-channel output PWM
◆2x I2C
◆2x SPI
◆Quadrature decoder(QDEC)
◆1x 12bit ADC, support 6ch single-ended input or 4ch differential input
◆1x PGA, support analog microphone input
◆4ch DMA
◆6x 24bit timer
◆WDT
◆SWD debug
▲Flexible power management
◆Supply voltage range 1.8V to 3.6V
◆Embedded 1.35V buck DC-DC converter
▲Certification
◆BQB:D054808

CHIPSEA

CST92F25

More

Part#

Chip

More

Health and medical ]Wearables ]Internet of things(IoT) ]

More

Datasheet

More

More

Please see the document for details

More

More

QFN32;SSOP24

English Chinese Chinese and English Japanese

2021/10/16

REV1.5

8.4 MB

- The full preview is over. If you want to read the whole 37 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: