LM111/LM211/LM311 Voltage Comparator

2022-02-08
●General Description
■The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
■Both the inputs and the outputs of the LM111, LM211 or theLM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.
■The LM211 is identical to the LM111, except that its performance is specified over a -25ºC to +85ºC temperature range, instead of -55ºC to +125ºC. The LM311 has a temperature range of a 0ºC to ﹢70ºC.
●Features
■Operates from single 5V supply
■Input current: 150 nA max. over temperature
■Offset current: 20 nA max. over temperature
■Differential input voltage range: ±30V
■Power consumption: 135 mW at ±15V

National Semiconductor

LM111LM211LM311LM106LM710LM111HLM111H/883LM211HLM311HLM111J-8LM111J-8/883LM311MLM311MXLM311NLM111J/883LM111W/883LM111WG/883LM111WLM111JLM111WG

More

Part#

Voltage Comparator

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

January 2001

DS005704

620 KB

- The full preview is over. If you want to read the whole 23 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: