FAN9672 - Two-Channel Interleaved CCM PFC Controller
●The FAN9672 is an interleaved two-channel Continuous Conduction Mode (CCM) Power Factor Correction (PFC) controller IC intended for PFC pre-regulators. Incorporating circuits for leading edge., average current., and “boost”-type power factor correction: the FAN9672 enables the design of a power supply that fully complies with the IEC1000-3-2 specification. Interleaved operation provides substantial reduction in the input and output ripple currents and the conducted EMI filtering becomes simpler and cost effective.
●An innovative channel-management function allows slave channels to be loaded and unloaded smoothly in lower power-level conditions according to setting voltage on the CM pin. improving the PFC converter’s load transient response.
●The FAN9672 also incorporates a variety of protection functions., including: peak current limiting, input voltage brownout protection, and TriFault Detect function.
■Features
●Continuous Conduction Mode Control
●Two-Channel PFC Control (Maximum)
●Average Current-Mode Control
●PFC Slave Channel Management Function
●Programmable Operation Frequency Range: 18 kHz ~ 40 kHz or 55 kHz ~ 75 kHz
●Programmable PFC Output Voltage
●Dual Current Limit Functions
●TriFault Detect Protects Against Feedback Loop Failure
●Sag Protection
●Programmable Soft-Start
●Under-Voltage Lockout (UVLO)
●Differential Current Sensing
●Available in 32-Pin LQFP Package
Two-Channel Interleaved CCM PFC Controller 、 interleaved two-channel Continuous Conduction Mode (CCM) Power Factor Correction (PFC) controller |
|
[ High Power AC-DC Power Supply ][ DC Motor Power Supply ][ White Goods ][ e.g. Air Conditioner Power Supply ][ Sen- er and Telecom Power Supply ][ UPS ][ Industrial Welding ][ Power Supply ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
32−Lead,Low Quad Flat Package (SOP) |
|
English Chinese Chinese and English Japanese |
|
2019/6/20 |
|
Rev. 4 |
|
FAN9672/D |
|
2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.