L05150/L1MLT0350-5.5C LED driver Manual

PublishTime：2022-01-21

●The L05150 is a 5.5 Watt LED driver with a fixed current output of 350 mA and a voltage range of 3 to 15 Vdc. The primary voltage range is 100 to 240 Vac or 150 to 275 Vdc .The driver has fourfold protection: Thermal, short circuit of the secondary side, over voltage and open circuit
▲IMPORTANT INFORMATION
◆The LED driver must be installed by qualified electricians only!
◆Switch off the power supply before installation.
◆Switch off the power supply and wait one minute before making any changes in the secondary circuit (e.g. replacing LEDs).
◆Caution: Only use constant current type LEDs.
◆The LED driver is intended for indoor use only
◆Never connect a load higher than 5.5W
◆At build-in temperatures higher than +40°C; Mount the driver on a heat conductive surface of at least 200cm². Always check if the surface is sufficient enough.
◆The output is SELV and may never be combined with the main cables.

Brand of Product：	Fulham
Part#：	L05150 、 L1MLT0350-5.5C More Part#
Product Category：	LED driver More
Application：	More
Data Type：	User's Guide More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	01-06-2017
Version Number：	V5
Data Encoding：	845150_V5
Data Size：	606 KB

Data section preview(1pages)

- The full preview is over,the data is 1 pages -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits