TCD3MLT0350-50L/TCD3MLT0350-55L LED DRIVERS CONDITION OF ACCEPTABILITY
▲1.This driver has been evaluated using a resistive load resulting in the electrical rating below. Each product is provided with three outputs.
▲2.This driver is to be used in maximum 60ºC ambient. When used in end product, the maximum temperature on case surface shall not exceed the temperature note as below:
▲3.This driver is provided with Class 2 output noted as below. Model No. Class 2 Output Type for Model TCD3MLT0350-50L, TCD3MLT0350-55L USA only.
▲4.This driver is intended for use in a dry and damp locations.
▲5.This driver is provided with a solid conductor wire (18 AWG, min 105°C, min 300 V) with two (yellow, gray) leads for open or close to vary the output current(dimming control). The dimming control was fully covered with electrical tubing. The output of the leads was investigated as Class 2 circuit and cannot be interconnected with the output of this driver.
▲6. This driver is only suitable for a stationary or fixed wiring unit.
▲7. The suitability of grounding and wiring is to be determined in the end use application.
|
|
|
|
Test Report |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2015/4/2 |
|
|
REV A |
|
|
|
|
|
56 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
