MS2840A Signal Analyzer Product Brochure
2022-01-07
◆MS2840A-044: 9 kHz to 26.5 GHz
◆MS2840A-046: 9 kHz to 44.5 GHz
◆« MS2840A-040: 9 kHz to 3.6 GHz »
◆« MS2840A-041: 9 kHz to 6.0 GHz »
◆The Pure Signal Analyzer
■Excellent Phase Noise Performance using New Synthesizer Design
■Based on more than 120 years of technological excellence, Anritsu has built a new synthesizer design into the MS2840A, offering never-seen-before, high, close-in phase noise performance.
■For R&D and Manufacturing of Wireless Equipment, Radar and Transmitter Device
●The MS2840A series (26.5 GHz /44.5 GHz models) close-in phase noise performance is –123 dBc/Hz (10 kHz offset) at a measurement frequency of 1 GHz. Additionally, this excellent fundamental performance is leveraged at millimeter-wave-band measurements (50 GHz to 90 GHz). With the High Performance Waveguide Mixer connected, an extremely high performance of –100 dBc/Hz (10 kHz offset, meas.) is achieved at a measurement frequency of 79 GHz.
●The MS2840A series (26.5 GHz/44.5 GHz models) with high, close-in phase-noise-performance spectrum and signal analyzers is ideal for developing and manufacturing radio and radar equipment as well as transmitters, etc., at every measurement frequency.
◆MS2840A-046: 9 kHz to 44.5 GHz
◆« MS2840A-040: 9 kHz to 3.6 GHz »
◆« MS2840A-041: 9 kHz to 6.0 GHz »
◆The Pure Signal Analyzer
■Excellent Phase Noise Performance using New Synthesizer Design
■Based on more than 120 years of technological excellence, Anritsu has built a new synthesizer design into the MS2840A, offering never-seen-before, high, close-in phase noise performance.
■For R&D and Manufacturing of Wireless Equipment, Radar and Transmitter Device
●The MS2840A series (26.5 GHz /44.5 GHz models) close-in phase noise performance is –123 dBc/Hz (10 kHz offset) at a measurement frequency of 1 GHz. Additionally, this excellent fundamental performance is leveraged at millimeter-wave-band measurements (50 GHz to 90 GHz). With the High Performance Waveguide Mixer connected, an extremely high performance of –100 dBc/Hz (10 kHz offset, meas.) is achieved at a measurement frequency of 79 GHz.
●The MS2840A series (26.5 GHz/44.5 GHz models) with high, close-in phase-noise-performance spectrum and signal analyzers is ideal for developing and manufacturing radio and radar equipment as well as transmitters, etc., at every measurement frequency.
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.