UR1060-SERIES SPECIFICATION FOR APPROVAL
●All test DCR is refered to 25℃±5℃ ambient.
●Irms:DC current (A)that will cause an approximate ΔT of 40℃(Typical)
●Isat:DC current (A) that will cause Lo to drop approximately 30%(Typical)
●Operatomg temperature range -40℃ to 125℃.
●Inductance tolerance ±20%.100KHz and 0.1Vrms.
●The part temperature(ambient+temp rise)should not exceed 125℃ under worse case operating conditions. Circuit design,component placement,PWB trace size and thickness,airflow and other cooling provision all affect the part temperature.Part temperature should be verified in the end application.
●The rated current as listed is either the saturation current or the heating current depending on whith value is lower.
●Absolute maximum voltage 30VDC
|
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2020/10/24 |
|
Rev.A |
|
|
|
646 KB |
- +1 Like
- Add to Favorites
Recommend
- Su’scon Aluminum Electrolytic Capacitors, Designed for Automotive Electronics and Compliant with AEC-Q200 Standard
- Atex-ready Plug & Play Solution for Process Analytical Technology (PAT)
- 8610 Battery Pack Integrated Testbed for Testing New Energy Vehicle Battery Systems and Subparts | Chroma
- Xsens Inertial Sensor Module Helps Improve Rail Safety with Intelligence on Wheels
- Chroma 62000d Programmable Bidirectional Dc Power Supplies Have Both Power Source and Load Characteristics
- GaN Transistor for Several Power Applications
- New VCSEL Module Technology: Increasing the Output of Spatial Recognition and Ranging Systems by 30% | ROHM
- DGWorld Autonomous Driving Technology Enables Trucks to Work 24/7 with No Driver
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.