HPC-2 Instruction Manual
●The receiver is encased in a waterproof mounting tray and provides wire leads for connecting the input power and outputs. The “PROGRAM” push button switch on the receiver is used to learn the transmitter(s) address and store it in memory. The “PROGRAM” LED on the receiver indicates the receiver’s programming status and also illuminates when a relay is energized. For more details on how to program the receiver, please go to page 2.
●The keyfob style RF transmitter (model KF340-2) supplied with the unit has two momentary switches that control normally-open contacts on the receiver which remain energized for as long as the buttons are pressed. A third set of non-isolated relay contacts close automatically when either of the two main relays are closed.
●To extend the receiver’s range of operation, an optional external antenna is available. It is enclosed in a separate waterproof housing and increases range performance up to 900 feet under ideal conditions. The LRA-340 long-range antenna is supplied with a 4-foot cable with waterproof connector that attaches to the receiver. For the longest possible range of reception, the antenna should be mounted vertically, above the receiver, such as on a vertical pole. The antenna can either be purchased with the kit by selecting the “long-range” option for the “communication range”, or it may be purchased separately. For more details on how to install a long-range antenna, please see page 3.
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
7/07/20 |
|
REV C |
|
|
|
1.8 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.