SCT2450C 4.5V-42V Vin, 5A, High Efficiency Step-down DCDC Converter with Programmable Frequency
■The SCT2450C is 5A buck converters with wide input voltage, ranging from 4.5V to 42V, which integrates an 80mΩ high-side MOSFET. The SCT2450C, adopting the peak current mode control, supports the Pulse Skipping Modulation (PSM) which assists the converter on achieving high efficiency at light load or standby condition.
■The SCT2450C features programmable switching frequency from 100kHz to 2.2MHz with an external resistor, which provides the flexibility to optimize either efficiency or external component size. The converter supports external clock synchronization with a frequency band from 100kHz to 2.2MHz. The SCT2450C allows power conversion from high input voltage to low output voltage with a minimum 130ns on-time of high-side MOSFET.
■The device offers fixed 4ms soft start to prevent inrush current during the startup of output voltage ramping. The SCT2450C features external loop compensation to provide the flexibility to optimize either loop stability or loop response.
■The SCT2450C provides cycle-by-cycle current limit, thermal shutdown protection, output over-voltage protection and input voltage under-voltage protection. The device is available in an 8-pin ESOP-8 package.
|
[ 12-V Power System ][ 24-V Power System ][ GPS Tracker ][ Industrial Automation ][ Motor Control ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
ESOP-8 |
|
|
English Chinese Chinese and English Japanese |
|
|
2021/9/28 |
|
|
Rev. 1.2 |
|
|
|
|
|
2.7 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
