VLT® Common AC Drive Modules Fact Sheet
●A reference design for the cabinet of the drives has been made using the Rittal TS8 enclosure. This reference design makes it easy for panel builders and machine builders to build their own cabinets, worldwide.
●Reliability
■Enjoy long drive lifetime and save on extra components, with integrated fuses and DC coils. The high-power drive modules are delivered with these components built-in as standard.
■Increase uptime with the Reduce Run functionality. This function enables the system to run at part load even if one of the drive units fails.
●Back-channel cooling
■A unique design uses a ducted back channel to pass cooling air over heat sinks with minimal air passing through the electronics area. This design allows 90% of the heat losses to be exhausted directly outside of the enclosure. Back-channel cooling improves reliability and prolongs life by dramatically reducing temperature rise and contamination of the electronic components. There is an IP54 seal between the back-channel cooling duct and the electronics area of the VLT® drive.
●Product families
■VLT® AutomationDrive FC 302
■VLT® AQUA Drive FC 202
■VLT® HVAC Drive FC 102
●Power range
■6-pulse
▲450–1200 kW
▲600–1350 hp
■12-pulse
▲250–1200 kW
▲350–1350 hp
●Voltage range
■380-480/500 V
■525-690 V
●Enclosure rating
■IP00
|
|
Technical Documentation |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2016.02 |
|
|
|
DKDD.PFP.404.A1.02 |
|
210 KB |
- +1 Like
- Add to Favorites
Recommend
- Partnership for True Multiple Sourcing: Semikron Danfoss Power Modules with ROHM IGBTs
- Absolute Pressure Sensor with Low Power Consumption, Operating Temperature Ranges from -40°c to 125°c
- Nippon Chemi-Con Developed Three Camera Module Models NCM12-FC, NCM10-FC, NCM12-FE for Automotive Electronics and Industrial Equipment
- Introduction to Fiber Optic Connectors
- Copper Is Here to Stay in Power Electronics
- How to Use Wifi Module MT7688 to Establish Connection to Solve Long-distance Communication Problems?
- Epson Newly Lanuched 2.05x1.2mm Size 32.768kHz Crystal Unit FC2012SN Supporting up to +105℃ Operating Temperature
- Why Fiber Optic Attenuators Are Used in Fiber Optic Cable Transmission Lines?
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.