EBMC Combination Line Starters and Enclosures Data sheet
2021-12-22
●Features:
■Rugged, corrosion resistant, cast copper-free aluminum construction (less than 0.4 of 1%)
■Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
■Total compliance to the wiring end room requirements of the National Electrical Code*/Canadian Electrical Code
■Semi-clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
■Minimum enclosure-to-enclosure spacing with little interference between the opened cover and an adjacent enclosure
■Stainless steel hinges allow the cover to swing well out of the way
■Stainless steel, quick release, captive, hex head cover bolts.Stainless steel springs provide clear indication cover bolts are fully retracted from body
■Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers’ starters and breakers
■Simple, straightforward installation of breaker and starter on pre drilled mounting plate within enclosure. Mounting plate also field removable.
■Circuit breaker motor circuit protector external operating handle can be padlocked in either“ON”or “OFF”positions
■Neoprene cover gasket permanently attached to the cover seals out moisture
■Bodies have top and bottom drilled and tapped entrances for power conduits plus one at the bottom for control conduit. Removable reducers are supplied, as standard, to accommodate smaller size conduits. All conduit entrances are plugged.
■Tap-on mounting feet
■Optional EMPS control devices may be added to enclosure cover
■Steel bracket for lifting larger enclosures during installation supplied as standard
■Rugged, corrosion resistant, cast copper-free aluminum construction (less than 0.4 of 1%)
■Component operating handles located through the right side wall of the body permits visual confirmation of correct component assembly and operation
■Total compliance to the wiring end room requirements of the National Electrical Code*/Canadian Electrical Code
■Semi-clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
■Minimum enclosure-to-enclosure spacing with little interference between the opened cover and an adjacent enclosure
■Stainless steel hinges allow the cover to swing well out of the way
■Stainless steel, quick release, captive, hex head cover bolts.Stainless steel springs provide clear indication cover bolts are fully retracted from body
■Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers’ starters and breakers
■Simple, straightforward installation of breaker and starter on pre drilled mounting plate within enclosure. Mounting plate also field removable.
■Circuit breaker motor circuit protector external operating handle can be padlocked in either“ON”or “OFF”positions
■Neoprene cover gasket permanently attached to the cover seals out moisture
■Bodies have top and bottom drilled and tapped entrances for power conduits plus one at the bottom for control conduit. Removable reducers are supplied, as standard, to accommodate smaller size conduits. All conduit entrances are plugged.
■Tap-on mounting feet
■Optional EMPS control devices may be added to enclosure cover
■Steel bracket for lifting larger enclosures during installation supplied as standard
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
