CHA44X/CH44X Hall-effect sensor

2021-12-17
■DESCRIPTION:
●The CHA44X/CH44X Hall-effect sensor is extremely temperature-stable and stress-resistant sensor ICs, especially suited for operation over extended temperature ranges from -40°C to 150°C. Superior high temperature performance is possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
●The device includes a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA.
●An on-board regulator permits operation with supply voltages of 2.5 to 22V. The advantage of operating down to 2.5V is that the device can used in 2.5V applications or with additional external resistance in series with the supply pin for greater protection against high-voltage transient events.
●The CHA44X/CH44X series is latch Hall switch. For the latch mode, there are also invert polarity devices. Normally a south pole of sufficient strength turns onthe output; However, for invert polarity devices, a north pole of sufficient strength turns on the output.
●The CHA44X/CH44X also integrated internal clamps against supply/output transients; output short circuits protection; reverse battery conditions.
●Three package styles provide a magnetically optimized package for most applications, SOT-23,TO-92S and SOT-89. Each package type is lead (Pb) free (suffix, –T), with a 100% matte-tin-plated lead-frame.
■FEATURES and FUNCTIONAL DIAGRAM:
●AEC-Q100 automotive qualified for CHA44X
●Digital Bipolar-Latch Hall Sensor
●Multiple Sensitivity Options (BOP / BRP):+15/ -15 Gauss; +30 / -30 Gauss; +45/ -45 Gauss; +120 / -120 Gauss;
●Chopper stabilization for stable operate points throughout operating temperature range
●On board voltage regulator for 2.5V to 22V range
●Resistant to physical stress
●Output short-circuit protection
●Operation from unregulated supply
●Reverse-battery and freewheeling protection
●Solid-state reliability
●Wide Operating temperature range: -40 to 150℃
●Small package sizes TO-92S,SOT-23 and SOT-89
●RoHS-compliant material meets directive 2011/65/EU

Cosemitech

CHA44XCH44XCHA441SRCHA441TBCHA441ERCHA442SRCHA442TBCHA442ERCHA443SRCHA443TBCHA443ERCHA444SRCHA444TBCHA444ERCHA441NSRCHA441NTBCHA441NERCHA442NSRCHA442NTBCHA442NERCHA443NSRCHA443NTBCHA443NERCHA444NSRCHA444NTBCHA444NERCH441SRCH441TBCH441ERCH442SRCH442TBCH442ERCH443SRCH443TBCH443ERCH444SRCH444TBCH444ERCH441NSRCH441NTBCH441NERCH442NSRCH442NTBCH442NERCH443NSRCH443NTBCH443NERCH444NSRCH444NTBCH444NER

More

Part#

Hall-effect sensorBipolar latching Hall-effect digital sensor IC

More

Speed and RPM sensing ]Tachometer ]counter pickup ]Flow-rate sensing ]Brushless dc motor commutation ]Motor ]fan control ]Robotics control ]

More

Datasheet

More

More

Please see the document for details

More

More

TO-92S;SOT-23;SOT-89

English Chinese Chinese and English Japanese

2021/7/28

1.4 MB

- The full preview is over. If you want to read the whole 15 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: