EVAL-ADAU1452REVBZ User Guide UG-1662 Evaluating the ADAU1452 SigmaDSP Audio Processor
2021-12-03
■GENERAL DESCRIPTION
●This user guide describes the design, setup, and operation of the E VA L-ADAU1452REVBZ evaluation board. This board evaluates a nd develops the software for the ADAU1452 andADAU1462 SigmaDSP® processors. The ADAU1452 and the ADAU1462 are functionally identical, except that the ADAU1462 has more program and data memory. Selecting this component in the software instructs the compiler to limit the amount of allocated memory to match the ADAU1462.
●All other procedures and instructions in this user guide are applicable to both the ADAU1462 and ADAU1452.
● The EVAL-ADAU1452REVBZ evaluation board provides access to the digital serial audio ports of the ADAU1452 and some of thegeneral-purpose input/outputs (GPIOs). An analog input and output is provided by the AD1938 codec included in the evaluation kit.
●The ADAU1452 core is programmed using the Analog Devices, Inc., SigmaStudio® software, which interfaces to the evaluation board via the universal serial bus interface ( USBi). The on-board electronically erasable programmable read-only memory (EEPROM) can be programmed for self boot mode.
●The evaluation board is powered by a 6 V dc supply, which is regulated to the voltages required on the board. The printedcircuit board (PCB) is a 4-layer design with a ground plane and a power plane on the inner layers. The evaluation board includesconnectors for external analog inputs and outputs and optical Sony/Philips d igital i nterface (S/PDIF) interfaces. The integrated oscillator circuit and the on-board, 12.288 MHz passive crystal(Y1) provides the master clock
●For full details, see the ADAU1452 and AD1938 data sheets, which must be used in conjunction with this user guide when using the E VA L-ADAU1452REVBZ evaluation board
■FEATURES
●On-board AD1938 codec with 4 analog inputs and 8 analog outputs
●Stereo S/PDIF input and output
●Self boot EEPROM memory
●This user guide describes the design, setup, and operation of the E VA L-ADAU1452REVBZ evaluation board. This board evaluates a nd develops the software for the ADAU1452 andADAU1462 SigmaDSP® processors. The ADAU1452 and the ADAU1462 are functionally identical, except that the ADAU1462 has more program and data memory. Selecting this component in the software instructs the compiler to limit the amount of allocated memory to match the ADAU1462.
●All other procedures and instructions in this user guide are applicable to both the ADAU1462 and ADAU1452.
● The EVAL-ADAU1452REVBZ evaluation board provides access to the digital serial audio ports of the ADAU1452 and some of thegeneral-purpose input/outputs (GPIOs). An analog input and output is provided by the AD1938 codec included in the evaluation kit.
●The ADAU1452 core is programmed using the Analog Devices, Inc., SigmaStudio® software, which interfaces to the evaluation board via the universal serial bus interface ( USBi). The on-board electronically erasable programmable read-only memory (EEPROM) can be programmed for self boot mode.
●The evaluation board is powered by a 6 V dc supply, which is regulated to the voltages required on the board. The printedcircuit board (PCB) is a 4-layer design with a ground plane and a power plane on the inner layers. The evaluation board includesconnectors for external analog inputs and outputs and optical Sony/Philips d igital i nterface (S/PDIF) interfaces. The integrated oscillator circuit and the on-board, 12.288 MHz passive crystal(Y1) provides the master clock
●For full details, see the ADAU1452 and AD1938 data sheets, which must be used in conjunction with this user guide when using the E VA L-ADAU1452REVBZ evaluation board
■FEATURES
●On-board AD1938 codec with 4 analog inputs and 8 analog outputs
●Stereo S/PDIF input and output
●Self boot EEPROM memory
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
