AN-501 Power-Up/Down Considerations in NOR Flash Application Note
■Flash memory devices are widely used components in microcontroller systems as regular companions to MCUs. Compared to MCUs, complex PMICs, and other SoCs, Flash memory is perceived to be a rather simple device. For example, a typical serial Flash device is commonly housed in an eight-pin package, contains two data pins (in and out), and communicates with the MCU over a simple four-wire SPI protocol. Such perceived simplicity, however, can be deceiving. Some important system design requirements specific to NOR Flash, such as proper power-up sequencing, can be overlooked. Under certain conditions, this can lead to unexpected and undesirable system operation.
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
09-2021 |
|
Revision A2 |
|
AN501 |
|
1 MB |
- +1 Like
- Add to Favorites
Recommend
- [经验]瑞萨32位MCU RA2E1如何利用FSP工具生成sci_uart的配置代码
- ELETE Press-fit With High Electrical Reliability, Suitable For Communications, Automotive Electronics, Medical And Other Industries
- [应用]25A/40V德欧泰克SBX2540-3G太阳能旁路二极管用于光伏电池板,泄漏电流低仅200μA
- Renesas and Dialog Semiconductor Announce Conclusion of Final Regulatory Review and the Expected Closing Date for Acquisition
- Renesas Completes Acquisition of Dialog Semiconductor
- Dialog Semiconductor’s DA16200 Secures PSA Certified Level 1 for Wi-Fi SoCs
- Dialog Semiconductor Delivers WiRa™-Enabled Solution to Enhance Carnival Corporation’s OceanMedallion™ Wearable
- Dialog Semiconductor’s Power Management Selected for the Xilinx Kria K26 Adaptive System-on-Modules
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.