NXP® 88MW32X 802.11N WI-FI® DUAL BAND MICROCONTROLLER SOC FACT SHEET
●PRODUCT OVERVIEW
■Several features of the NXP 88MW320/322 SoC enable low system costs and high WLAN protocol processing. For example, the high degree of integration in the SoC requires only one 3.3 V power input, a 38.4 MHz crystal and SPI flash, while the RF path needs only a low-pass filter for antenna connection.
■Proven and mature IEEE 802.11n/g/b NXP technology powers a full-featured WLAN subsystem in the SoC. This WLAN subsystem integrates a WLAN MAC, baseband, and direct-conversion RF radio with integrated PA, LINA and transmit/receive switch. It also integrates a CPU subsystem with integrated memory to run NXP WLAN firmware to handle real-time WLAN protocol processing to offload many WLAN functions from the main application CPU.
■An Arm® Cortex®-M4F CPU that operates up to 200 MHz powers the 88MW320/322 application subsystem. The device supports an integrated 512 KB SRAM, 128 KB mask ROM and a QSPI interface to external flash. An integrated flash controller with a 32 KB SRAM cache enables execute in place (XIP) support for firmware from flash.
■The SoC is designed for low-power operation and includes several low-power states and fast wake-up times. Multiple power domains and clocks can be individually shut down to save power. The SoC also has a high-efficiency internal PA that can be operated in low-power mode to save power. The microcontroller and WLAN subsystems can be placed into low-power states, independently, supporting a variety of application use cases. An internal DC-DC regulator provides the 1.8 V rail for the WLAN subsystem.
■The SoC provides a full array of peripheral interfaces including SSP/SPI/I2S (3x), UART (3x), I2C (2x), general-purpose timers and PWM, ADC, DAC, analog comparator, and GPIOs. It also includes a hardware cryptographic engine, RTC, and watchdog timer.
■The 88MW322 SoC includes a high-speed USB On-The-Go (OTG) interface to enable USB audio, video and other applications.
■A complete set of digital and analog interfaces enables direct interfacing for I/O and avoids the need for external chips. The application CPU can be used to support custom application development and avoids the need for another microcontroller or processor.
●KEY FEATURES
■Highly integrated SoC requiring very few external components for a full system operation
■Multiple low-power modes and fast wake-up times
■Full-featured, single stream 802.11n/g/b WLAN
■High-efficiency PA with a low-power (10 dB) mode
■Cortex-M4F application CPU for applications with integrated 512 KB SRAM and 128 KB mask ROM
■Flash controller with embedded 32 KB SRAM cache to support XIP from external SPI flash
■Secure boot
■Full set of digital and analog I/O interfaces
WLAN microcontroller system-on-chip 、 SoC 、 WI-FI® DUAL BAND MICROCONTROLLER SOC |
|
[ Smart Home ][ smart outlet ][ light switch ][ security camera ][ thermostat ][ sprinkler controller ][ sensor ][ door lock ][ door bell ][ garage door ][ security system ][ Industrial ][ building automation ][ smart lighting ][ Wi-Fi ][ radio bridge ][ point of sale (POS) terminals ][ Smart Devices ][ coffee pot ][ rice cooker ][ vacuum cleaner ][ air purifier ][ pet monitor ][ weighing scale ][ glucometer ][ blood pressure monitor ][ fitness equipment ][ Smart Appliances ][ refrigerator ][ washer ][ dryer ][ oven range ][ microwave ][ dishwasher ][ water heater ][ air conditioner ][ Smart Accessories ][ smart speakers ][ headset ][ alarm clock ][ gaming accessory ][ remote control ][ Gateways ][ Bluetooth Smart Mesh ][ radios to Wi-Fi/IP network ] |
|
Supplier and Product Introduction |
|
|
|
Please see the document for details |
|
|
|
|
|
QFN |
|
English Chinese Chinese and English Japanese |
|
2020 |
|
REV 1 |
|
M88MW32X |
|
278 KB |
- +1 Like
- Add to Favorites
Recommend
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- Keysight, NXP Collaborate to Advance Development of 5G Fixed Wireless Access (FWA) Solutions Enables technology providers to verify CPE
- Ultra-Low IQ PMIC from ROHM Selected to Power NXP iMX8M Nano for High Performance Embedded Artists Industrial Control Board
- AEC-Q100 Qualified Clock Generator Adopted on NXP S32G Automotive Network Processor Reference Design
- Unleashing the Potential of i.MX 8M Mini in Industrial and Medical Applications
- C-V2X Certification – Necessary or Just Nice to Have?
- Runic Technology Participates in the 2021 ASPENCORE Double Summit
- Premo Launches PLC-LW-Series Transformer Family for Power Line Communication
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.