STLINK-V3SET debugger/programmer for STM8 and STM32

2021-11-29
●Introduction
■The STLINK-V3SET is a stand-alone modular debugging and programming probe for the STM8 and STM32 microcontrollers. This product is composed of the main module and the complementary adapter board. It supports the SWIM and JTAG/SWD interfaces for communication with any STM8 or STM32 microcontroller located on an application board.
The STLINK-V3SET provides a Virtual COM port interface allowing the host PC to communicate with the target microcontroller through one UART. It also provides bridge interfaces to several communication protocols allowing, for instance, the programming of the target through the bootloader.
■The STLINK-V3SET can provide a second Virtual COM port interface allowing the host PC to communicate with the target microcontroller through another UART (called bridge UART). Bridge UART signals, including optional RTS and CTS, are available on the adapter board only (MB1440). The second Virtual COM port activation is done through a reversible firmware update, which also disables the mass storage interface (used for drag-and-drop Flash programming).
■The modular architecture of STLINK-V3SET enables the extension of its main features through additional modules such as the adapter board for different connectors, the B-STLINK-VOLT board for voltage adaptation, and the B-STLINK-ISOL board for voltage adaptation and galvanic isolation.

ST

STLINK-V3SETSTM8STM32B-STLINK-VOLTB-STLINK-ISOL

More

Part#

debuggerprogrammermicrocontrollers

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

5-Feb-2021

Rev 6

UM2448

2.8 MB

- The full preview is over. If you want to read the whole 49 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: