PIC32MZ EF FAMILY PIC32MZ Embedded Connectivity with Floating Point Unit (EF) Family Silicon Errata and Data Sheet Clarification
2021-11-24
●The PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family of devices that you have received conform functionally to the current Device Data Sheet (DS60001320G), except for the anomalies described in this document.
The silicon issues discussed in the following pages are for silicon revisions with the Device and Revision IDs listed in Table 1. The silicon issues are summarized in Table 2.
The errata described in this document will be addressed in future revisions of the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family silicon.
Data Sheet clarifications and corrections (if applicable) start on page 13, following the discussion of silicon issues.
●For example, to identify the silicon revision level using MPLAB X IDE in conjunction with a hardware debugger:
■Using the appropriate interface, connect the device to the hardware debugger.
■Open an MPLAB X IDE project.
■Configure the MPLAB X IDE project for the appropriate device and hardware debugger.
■Select Window > Dashboard, and then click the Refresh Debug Tool Status icon ( ).
■The part number and the Device and Revision ID values appear in the Output window.
●The Device and Revision ID values for the various PIC32MZ EF Family silicon revisions are shown in Table 1.
The silicon issues discussed in the following pages are for silicon revisions with the Device and Revision IDs listed in Table 1. The silicon issues are summarized in Table 2.
The errata described in this document will be addressed in future revisions of the PIC32MZ Embedded Connectivity with Floating Point Unit (EF) family silicon.
Data Sheet clarifications and corrections (if applicable) start on page 13, following the discussion of silicon issues.
●For example, to identify the silicon revision level using MPLAB X IDE in conjunction with a hardware debugger:
■Using the appropriate interface, connect the device to the hardware debugger.
■Open an MPLAB X IDE project.
■Configure the MPLAB X IDE project for the appropriate device and hardware debugger.
■Select Window > Dashboard, and then click the Refresh Debug Tool Status icon ( ).
■The part number and the Device and Revision ID values appear in the Output window.
●The Device and Revision ID values for the various PIC32MZ EF Family silicon revisions are shown in Table 1.
- +1 Like
- Add to Favorites
Recommend
More>
- ATP SATA SSDs Qualify for Compatibility and Interoperability with Microchip‘s New Tri-Mode Storage Adapters
- RX Family Software – The Past and the Future - #11 Navigating the TCP/IP Implementation Challenges with RX Family
- A Brief Overview of the RA Family Beginner‘s Guide
- The Past and the Future of Renesas RX Family Software
- Silicon Labs‘ Most Energy-efficient Wireless SoC New xG22E Family to Date with Energy Harvesting-ready Capabilities
- METZ CONNECT Angled X-coded Circuit Board Family – Space Saving Applications
- Renesas Ships 1 Billionth Device From RX Family of 32-bit Microcontrollers
- Silicon Labs Expands MCU Platform with a 50MHz Core Frequency New BB5 8-bit MCU Family
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.