SE050 Plug & Trust Secure Element Product data sheet

PublishTime：2021-11-24

■The SE050 is a ready-to-use IoT secure element solution. It provides a root of trust at the IC level and it gives an IoT system state-of-the-art, edge-to-cloud security capability right out of the box. SE050 allows for securely storing and provisioning credentials and performing cryptographic operations for security critical communication and control functions. SE050 is versatile in IoT security use cases such as secure connection to public/private clouds,device-to-device authentication or protection of sensor data. SE050 has an independent Common Criteria EAL 6+ security certification up to OS leveland supports both RSA & ECC asymmetric cryptographic algorithms with high key length and future proof ECC curves. The latest security measures protect the IC even against sophisticated non-invasive and invasive attack scenarios.The SE050 is a turnkey solution that comes with Java Card operating system and an applet optimized for IoT security use cases pre-installed. This is complemented by a comprehensive product support package, enabling fast time to market & easy design-in with Plug & Trust middleware for host applications, easy to use development kits,reference designs, and extensive documentation for product evaluation.The SE050 is a product platform that comes in several pin-to-pin compatible product variants, see [4].Additional information on the integration can be found in several application notes on theNXP website. Also see [3].For additional information on guidelines for the usability of SE050 and the security recommendations for using the module, see [5]To implement inclusive language, the terms "master/slave" has been replaced by"controller/target", following the recommendation of MIPI.
■Key benefits
● Plug & Trust for fast and easy design with complete product support package
● Easy integration with different MCU & MPU platforms and OS ́ (Linux, RTOS, Windows,Android, etc.)
● Turnkey solution ideal for system-level security without the need to write security code•Secure credential injection for root of trust at IC level
●Secure, zero-touch connectivity to public & private clouds
● Real end-to-end security, from sensor to cloud
●Ready-to-use example code for each of the key use cases
■Key features
The SE050 is based on NXP's Integral Security Architecture 3.0™ providing a secure and efficient protection against various security threats. The efficiency of the security measures is proven by a Common Criteria EAL6+ certification.The SE050 operates fully autonomously based on an integrated Javacard operating system and applet. Direct memory access is possible by the fixed functionalities of theapplet only. With that, the content from the memory is fully isolated from the host system.
●Built on NXP Integral Security Architecture 3.0 ™
●Uses advanced 40 nm silicon foundry technology
●CC EAL 6+ and SESIP4 certified HW and OS as environment to run NXP IoTapplications, supporting fully encrypted communications and secured lifecyclemanagement
●FIPS 140-2 certified platform with Security Level 3 for OS and Applet, and SecurityLevel 4 related to Physical Security of the HW
▲Disclaimer: FIPS certification require a specific product type. For more information,refer to [4].
●Effective protection against advanced attacks, including Power Analysis and FaultAttacks of various kinds
●Multiple logical and physical protection layers, including metal shielding, end-to-endencryption, memory encryption, tamper detection
●Support for RSA and ECC asymmetric cryptography algorithms, future proof curvesand high key length, e.g. Brainpool, Edwards and Montgomery curves
●Support for AES and DES symmetric cryptographic algorithms for encryption anddecryption
●Support for AES Modes: CBC, ECB, CTR
●HMAC, CMAC, SHA-1, SHA-224/256/384/512 operations
●Various options for key derivation functions, including HKDF, MIFARE KDF, PRF (TLS-PSK)
●Optional extended temperature range for industrial applications (-40 °C to +105 °C)
●Small footprint HX2QFN20 package (3x3 mm)
●Standard physical interface I²C target (High-speed mode, 3.4 Mbps), I²C controller(Fast mode, 400 kbps). Both can be active at the same time
●Dedicated CL wireless interface for IoT use cases simplifying configuration set-up,maintenance in the field and late stage configuration
●Secured user flash memory up to 50 kB for secure data or key storage
●Support for SCP03 protocol (bus encryption and encrypted credential injection) to securely bind the host with the secure element
●Support for applet level secure messaging channels to allow end-to-end encrypted communication in multi-tenant ecosystems

Brand of Product：	NXP
Part#：	SE050 More Part#
Product Category：	ready-to-use IoT Secure Element More
Application：	[ Smart Industry ][ Smart Home ][ Smart Cities ][ Smart Supply Chains ] More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：	HX2QFN20
Language：	English Chinese Chinese and English Japanese
Date of Creation：	5 May 2021
Version Number：	Rev. 3.2
Data Encoding：	504932
Data Size：	381 KB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 32 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits