GN 8170 Indexing Plungers
●Information:
■GN 8170 indexing plungers are intended for use in hygienic areas and, with their additional sealing lock nut, meet hygienic requirements on the knob and pin side. Wipers between knob and threaded body and between threaded body and pin as well as sealing rings on the threaded body and sealing lock nut keep the mechanics sealed. The high surface quality (Ra < 0.8 μm) and the free of dead-space mounting prevent dirt from adhering and facilitate cleaning.
■Indexing plungers with lock-out (type C) are used for applications where the plunger pin needs to stay in its retracted position. To achieve this, the knob is rotated by 90 degrees after being retracted. A notch keeps the plunger in the retracted position.
■Through-holes in the housing must be drilled at a right angle, free of burrs and without a chamfer. This ensures that the sealing rings will function after being mounted.
■GN 8170 indexing plungers are certified according to the DGUV Test.
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2021/09/30 |
|
|
|
|
|
|
|
|
706 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
