LEA-M8S module: u-blox M8 GNSS module
■The LEA-M8S module delivers concurrent GNSS location capability together with high-performance u-blox M8 position-ing technology in the industry proven LEA form factor.
■With its dual-frequency RF front-end, the LEA-M8S concur-rent GNSS module is able to intelligently use the highest number of visible satellites from up to three GNSS systems (GPS/Galileo together with either BeiDou or GLONASS) for more reliable positioning. The LEA-M8S provides exceptional performance with low system power, and is optimized for cost sensitive applications. It also supports message integrity protection, geofencing, and spoofing detection.
■The LEA-M8S has sophisticated RF-architecture and interference suppression ensuring maximum performance even in GNSS-hostile environments. It features very low power GLONASS functionality. This 6th generation module in the LEA form factor allows simple migration from LEA-6x GPS and LEA-6N GPS /GLONASS modules.
■The LEA-M8S combines a high level of robustness and integration capability with flexible connectivity options. The DDC (I2C compliant) interface provides connectivity and enables synergies with most u-blox cellular modules. For RF optimization, the LEA-M8S features a front-end SAW filter for increased jamming immunity.
■LEA-M8S module uses u-blox GNSS chips qualified according to AEC-Q100 and is manufactured in ISO/TS 16949 certified sites. Qualification tests are performed as stipulated in the ISO16750 standard: “Road vehicles – Environmental conditions and testing for electrical and electronic equipment”.
●Seamless upgrade of existing LEA-6 designs to multi-GNSS
■Concurrent reception of up to 3 GNSS (GPS, Galileo, GLONASS, BeiDou)
■Industry leading –167 dBm navigation sensitivity
■Combines low power consumption and high sensitivity
■Superior anti-spoofing and anti-jamming
■UART, USB and DDC (I2C compliant) interfaces
■Easy migration from LEA-6 module
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
LCC |
|
English Chinese Chinese and English Japanese |
|
2018 |
|
R05 |
|
UBX-16008989 |
|
162 KB |
- +1 Like
- Add to Favorites
Recommend
- Taoglas and u-blox Partner to Deliver Highly Reliable Positioning Solution for E-Bike Provider COWBOY
- New Movella Motion Sensor Xsens MTi-8 Backs up Centimeter-accurate Position Data with High-bandwidth Inertial Measurements
- MASWELL newly launched GNSS Planar Antenna AN.GNSS.L1.PCB with a low axial ratio covering the 1.56-1.602GHz Global Positioning frequency bands L1
- Maswell Newly Launched 5 combo 5G MIMO 700-3800MHz,GNSS High-precision Combination Antenna AN.4MIMO.700.3800.4C.1GNSS
- Nisshinbo will start production of the NT1191 (LNA for Multi-band GNSS) and the NT1192 (LNA for 1.2-GHz-band GNSS), for high-precision GNSS in June
- Nisshinbo‘s High-gain GNSS LNA NJG1187A-A for L1/L2/L5/L6 Conforms to AEC-Q100 Grade 2, VDA 6.3
- ASB ASL122 ——a Flat Gain LNA To Be Suitable To GNSS Receiver Application
- The Introduction of Global Navigation Satellite System-GNSS
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.