MPC555 ES200 Quick Reference APPLICATION NOTE
The ES200 can be used to evaluate the capabilities of an MPC555- based microcontroller system. All special features of the MPC555 are supported. The evaluation board is a development and test platform for software and hardware for the MPC555. It can be used by software and hardware developers to test programs, tools or circuits without having to develop a complete microcontroller system themselves.
The heart of the ES200 is the MPC555. The processor can be operated in ”single chip mode” as well as using external resources. The ES200 evaluation board has 1 Mbyte RAM, 512 Kbyte flash memory, one port replacement unit and numerous hardware expansion possibilities. To support development and test, the evaluation board can be connected to logic analyzers, debuggers and emulators produced by different manufacturers.
●Technical Features of the ES200
■The following list summarizes the technical features of the ES200
evaluation board. The architecture of the board is displayed in Fig.
2-1 on page 11.
▲General Advantages
◆Full function range of the MPC555 can be used
◆Microcontroller works with variable clock rate (up to 40 MHz)
▲Memory
◆Contains 1 Mbyte fast, synchronous SRAM (32-bit wide,burstable)
◆512 Kbyte external flash memory (32-bit wide, burstable)
▲Configurabile Features
◆Convenient configuration of the PLL of the microcontroller
via a triple DIP switch
◆Reset configuration of the MPC555 via a DIP switch (32 bits)
▲Additional Features
◆DIP switch selectable operating modes (BDM, Reset configuration
Word, and External Bus)
◆DIP switch selectable Flash programming voltages
▲Analysis and debug support
◆Flexible BDM interface (background debug mode) for debugging
◆Direct connection to the ETAS emulator test probe ETKP-1
◆Excellent analysis possibilities with 268-pin interface for logic analyzers (6 AMP Mictor and 2 berg type connector)
◆Connection of the probe to Lauterbach Trace32 emulation and programming system
▲Expansion capability
◆MAPI-400 interface:Interface as a connection to a customer-specific base-board (user extension board)
◆Customized communication expansion:Customer-specific expansion module, e.g. for CAN, additional serial interfaces (RS232)
▲ Host communication expansion
◆Expansion module for high-speed communication to host system, e.g. via Ethernet, Firewire
▲Port replacement unit (PRU)
◆In ”external bus mode” 64 general purpose I/O pins are available that are required by the MPC555 for the bus interface
|
|
|
|
Application note & Design Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020/03/24 |
|
|
|
|
|
QH220005 R1.0.1 EN |
|
|
944 KB |
- +1 Like
- Add to Favorites
Recommend
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- Keysight, NXP Collaborate to Advance Development of 5G Fixed Wireless Access (FWA) Solutions Enables technology providers to verify CPE
- Ultra-Low IQ PMIC from ROHM Selected to Power NXP iMX8M Nano for High Performance Embedded Artists Industrial Control Board
- AEC-Q100 Qualified Clock Generator Adopted on NXP S32G Automotive Network Processor Reference Design
- OWON Launched HDS200 Series Handheld Three-in-one Oscilloscope for Outdoor Maintenance and Rapid On-site Measurement
- Renesas Expands Focus on India with New NB-IoT Solution RH1NS200
- LTSpice Electro-thermal Model of 1200V, 2 Ohm SiC CLD KE12LS200
- SANYO DENKI Develops SANMOTION C S200 Motion Controller for Monitoring and Maintenance of Equipment
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
